Corian Drawer Pulls from Rock Solid [Cabinet Handles]
Rock Solid section index
Rock Solid cabinet drawer pulls made from Solid Surface Materials
You just moved into a house that has Corian counter tops in the kitchen. Or Wilsonart solid surface, Staron, or another brand. And the cabinet doors have old ugly generic aging handles which are better suited for a roadside rest stop. You would like a change, and something that will match or potentially matches. So check out the solid surface handles from Rock Solid. Corian and other brands have continuously added to and deleted colors over the years. In older kitchens or bathrooms, there might not be an exact color match available. But since there are many similar color groupings, you may still find a close enough match. Now of course if you have a more modern and still available color, you are in better luck. If you know your color name, the odds of matching are getting better.
There are fully solid surface handle designs, and several that have complimentary metallic accent pieces. Those with metal accents come in multiple sizes. For pre-existing drilled holes, measure your center to center to order the right size. If you have a really odd CTC, there are two manipulation tricks that can help when the measurements are just a little bit off.
Now, if you are building a new home or remodeling a kitchen or bathroom, the CTC measurement may not matter as you may not have any screw holes drilled into your doors or drawer fronts. And if you have left over scraps of your solid surface color, and Rock Solid by chance does not have any of that color available, we can have you send your sizable scraps to them so you can have handles and knobs made to match.
Solid surface handles have a nice feel to them too. They are smooth and firm, they seem to maintain room temperature so they do not feel cold when you grasp them. And they allow amble room on the underside to grab them comfortably. Handles can be mounted horizontally or vertically.
Please take a moment to read our Ordering Note on the Rock Solid summary page so you understand a special step about color selection that you need to take after placing items into your shopping cart. Because of the numerous custom options, you will enter your solid surface color choice(s) and potentially metallic color selection in a Comments Field.
As of March 1, 2023, Rock Solid has instituted a Minimum Quantity Order rule. A minimum of 10 handles PER STYLE is required to order any of the below. For the 5xx, 10xx, 11xx, and 12xx series, you cannot mix sizes to qualify. It must be 10 or more of the same size handle. This is due to their machinery set up and the entire process involved with the complexity of making these handles.
First: All Solid Surface material handles
These will not have any metal accent choices. The 5xx and 9xx Series do have multiple size options. The ROC-640 and ROC-740 come only in a 4" center to center. All of these will have embedded brass inserts that your screws will thread into for mounting. Please make sure your drilled hole centers match the handles as putting a little undue stress on the pulls could cause them to snap.
Rock Solid: Cabinet Knobs and Drawer Pulls
Rock Solid ROC-5xx Series drawer pull, all solid surface wire style pull.
Dia: 1/2"; Height: 1-3/8"; (MINIMUM ORDER, 10 PIECES OR MORE of the same CTC size.)
Select from 3 center to center sizes: 3", 3-1/2", or 96mm (3-3/4")
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
Dia: 1/2"; Height: 1-3/8"; (MINIMUM ORDER, 10 PIECES OR MORE of the same CTC size.)
Select from 3 center to center sizes: 3", 3-1/2", or 96mm (3-3/4")
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
$29.40
Add
Rock Solid: Cabinet Knobs and Drawer Pulls
Rock Solid ROC-640 drawer pull, all solid surface bigger foot style pull.
OL: 5-1/2"; CTC: 4"; Dia: 1/2"; Height: 1-3/8"; (MINIMUM ORDER, 10 PIECES OR MORE)
Comes in a 4" CTC only.
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
OL: 5-1/2"; CTC: 4"; Dia: 1/2"; Height: 1-3/8"; (MINIMUM ORDER, 10 PIECES OR MORE)
Comes in a 4" CTC only.
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
$29.40
Add
Rock Solid: Cabinet Knobs and Drawer Pulls
Rock Solid ROC-740 arched drawer pull, all solid surface sleek center arch.
OL: 5-3/4"; CTC: 4"; Dia: 1/2"; Height: 1-3/8"; (MINIMUM ORDER, 10 PIECES OR MORE)
Comes in a 4" CTC only.
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
OL: 5-3/4"; CTC: 4"; Dia: 1/2"; Height: 1-3/8"; (MINIMUM ORDER, 10 PIECES OR MORE)
Comes in a 4" CTC only.
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
$29.40
Add
Next: handles with metallic accent ends
The 10xx, 11xx, and 12xx Series are 3-piece handles. The solid surface center can be made in multiple lengths to create handles to accommodate various hole center sizes. As well as the sizes listed, should you need a custom size not shown, such as 2-1/2" or 3-1/4" or any size under the largest size listed, Rock Solid can do this upon request. They just alter the length of the center spindel. The spindels have drilled ends because the metallic ends have points on them that slip into the ends of the spindle. Then when you install the handles and tighten your screws, the handles snug up and give you a strong hold.
Additionally, the 10xx Series has spoon like feet that extend much further outward. This handle choice is good for concealing larger hole center sizes. Thus if you have 4-1/2" centers and the largest this handle is made is 4" CTC, then the feet of the handle can hide your old holes and you would just redrill to mount the 4" CTC. So handles with big feet give you a slight advantage when retrofitting. For new installs, that does not matter. You just drill screw hole centers to coincide with your handle centers.
Minimum order quantities apply. Each style must be ordered in a quantity of 10 or more. Multiple sizes of the same handle do not count in adding them up. It must be 10 or more of the same size also.
Rock Solid: Cabinet Knobs and Drawer Pulls
Rock Solid ROC-10xx Series drawer pull, solid surface insert with spoon-like feet.
Height: 1-1/4"; Feet extend over an inch greater than CTC measurement.
(MINIMUM ORDER, 10 PIECES OR MORE of the same CTC size.)
Select from 5 center to center sizes: 2-3/4"; 3"; 3-1/2"; 96mm; or 4"
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
AND tell us your preferred metal choice: polished chrome, polished brass, or burnished brass. Sadly brushed chrome feet are no longer available for the 10xx series. (Use the comments field on the last step of the cart process)
Height: 1-1/4"; Feet extend over an inch greater than CTC measurement.
(MINIMUM ORDER, 10 PIECES OR MORE of the same CTC size.)
Select from 5 center to center sizes: 2-3/4"; 3"; 3-1/2"; 96mm; or 4"
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
AND tell us your preferred metal choice: polished chrome, polished brass, or burnished brass. Sadly brushed chrome feet are no longer available for the 10xx series. (Use the comments field on the last step of the cart process)
$23.10
Add
Rock Solid: Cabinet Knobs and Drawer Pulls
Rock Solid ROC-11xx Series drawer pull, solid surface insert with spindle ends.
Height: 1-1/4"; Feet extend about an inch greater than CTC measurement.
(MINIMUM ORDER, 10 PIECES OR MORE of the same CTC size.)
Select from 5 center to center sizes: 2-3/4"; 3"; 3-1/2"; 96mm; or 4"
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
AND tell us your preferred metal choice: polished chrome, polished brass, brushed chrome, or burnished brass. (Use the comments field on the last step of the cart process)
Height: 1-1/4"; Feet extend about an inch greater than CTC measurement.
(MINIMUM ORDER, 10 PIECES OR MORE of the same CTC size.)
Select from 5 center to center sizes: 2-3/4"; 3"; 3-1/2"; 96mm; or 4"
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
AND tell us your preferred metal choice: polished chrome, polished brass, brushed chrome, or burnished brass. (Use the comments field on the last step of the cart process)
$23.10
Add
Rock Solid: Cabinet Knobs and Drawer Pulls
Rock Solid ROC-12xx Series drawer pull, solid surface insert with wire pull feet.
Dia: 1/2"; Height: 1-3/8"; (MINIMUM ORDER, 10 PIECES OR MORE of the same CTC size.)
Select from 4 center to center sizes: 2-3/4"; 3"; 3-1/2"; or 96mm (3-3/4")
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
AND tell us your preferred metal choice: polished chrome, polished brass, brushed chrome, or burnished brass. (Use the comments field on the last step of the cart process)
Dia: 1/2"; Height: 1-3/8"; (MINIMUM ORDER, 10 PIECES OR MORE of the same CTC size.)
Select from 4 center to center sizes: 2-3/4"; 3"; 3-1/2"; or 96mm (3-3/4")
Note your solid surface Color Brand and Color Name in the COMMENTS FIELD of the shopping cart process.
AND tell us your preferred metal choice: polished chrome, polished brass, brushed chrome, or burnished brass. (Use the comments field on the last step of the cart process)
$23.10
Add
We like checking with Rock Solid for material availability on all colors. Unless you ordered a color that we already know they have. Sometimes it does take Rock Solid a few days to get back to us. Please be patient with our update, it will come.
General lead time for all Rock Solid products is anywhere from a few days to a couple of weeks. We are asked to quote a two-week lead time for most orders with no complexity to them. Special orders and larger orders could take a little longer. No products are made in advance because of the numerous color possibilities. And sometimes Rock Solid works over the weekends, or they are just caught up, and an order can ship within a few days. We cannot gaurantee fast shipping. We have just noticed that some orders have shipped in a week or less when they work overtime.
When we get back to you after your order submission, and give you a complete quote and confirm if Rock Solid has the color or not, we will provide instructions for your next ordering step.
If you have not already read our longer Ordering Note about colors, you can click or tap that link. It is important to read.
If you would like to see Shipping Rates for Rock Solid orders, please click or tap that link.
And if you would just like to e-mail us any questions, you can do so.